کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7212351 | 1469349 | 2018 | 28 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Numerical evaluation of the influence of porosity on bending properties of 2D carbon/carbon composites
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Numerical evaluation of the influence of porosity on bending properties of 2D carbon/carbon composites Numerical evaluation of the influence of porosity on bending properties of 2D carbon/carbon composites](/preview/png/7212351.png)
چکیده انگلیسی
Numerical simulation with progressive damage criterion is implemented to investigate the effect of porosity on the bending properties of 2D cross-ply carbon/carbon (C/C) composites. The mechanical properties of Pyrocarbon matrix regarding the change of porosity are calculated by using Mori-Tanaka approach. Combining with the stiffness degradation scheme, the ultimate bending strengths are calculated in Abaqus though a user-defined subroutine (USDFLD). Delamination is modelled by inserting cohesive elements between two adjacent plies. A good agreement is obtained when the FEM results are compared to three-point bending experiments. The FEM results show that the bending strength decreases greatly with the increase of porosity. When the porosity reaches up to 18%, the bending strength is decreased by 57%. The major fracture behaviors are interlamination delamination and continuous crack damage in 90° plies. With the increase of porosity, more severe interlamination delamination will be slightly aggravated. In addition, the increase of porosity will also accelerate the damage in 90° plies.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 136, 1 March 2018, Pages 72-80
Journal: Composites Part B: Engineering - Volume 136, 1 March 2018, Pages 72-80
نویسندگان
Xujiang Chao, Lehua Qi, Wenlong Tian, Xianghui Hou, WenJing Ma, Hejun Li,