کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7212643 | 1469389 | 2016 | 22 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of adhesive thickness on the Mode I and II strain energy release rates. Comparative study between different approaches for the calculation of Mode I & II SERR's
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The assembly of composite components using adhesives, is one of the principal methods used for the assembly process. Composite materials have lately been used extensively in different engineering domains, as a result their use in wind energy, or specifically wind turbine blades has also seen a significant increase. This paper deals with the problem of determining the resistance of bonding and the effect of adhesive thickness on the resistance based on the strain energy release rate in both Mode I (peeling) and Mode II (shearing) type failure. Different theories are used to measure the SERR's and the effect of thickness on the measured SERR can be seen pronounced with each theory. This has been attributed to the type of failure and also the deformation of the interface before failure in each thickness case.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 96, 1 July 2016, Pages 354-363
Journal: Composites Part B: Engineering - Volume 96, 1 July 2016, Pages 354-363
نویسندگان
Owaisur Rahman Shah, Mostapha Tarfaoui,