Interfacial shear strength estimates of NiTi-Al matrix composites fabricated via ultrasonic additive manufacturing

The purpose of this study is to understand and improve the interfacial shear strength of metal matrix composites fabricated via ultrasonic additive manufacturing (UAM). NiTi-Al composites can exhibit dramatically lower thermal expansion compared to aluminum, yet blocking stresses developed during thermal cycling have been found to degrade and eventually cause interface failure in these composites. In this study, the strength of the interface was characterized with pullout tests. Since adhered aluminum was consistently observed on all pullout samples, the matrix yielded prior to the interface breaking. Measured pullout loads were utilized as an input to a finite element model for stress and shear lag analysis. The aluminum matrix experiences a calculated peak shear stress near 230 MPa, which is above its ultimate shear strength of 150-200 MPa thus corroborating the experimentally-observed matrix failure. The influence of various fiber surface treatments and consolidation characteristics on bond mechanisms was studied with scanning electron microscopy, energy dispersive X-ray spectroscopy, optical microscopy, and focused ion beam microscopy.