کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7213777 | 1469433 | 2013 | 32 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix
ترجمه فارسی عنوان
شبیه سازی ترموپلاستی کامپوزیت های چند لایه با الیاف مداوم و ماتریکس گرمانرم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
The development of a thermoforming process is complex and expensive to achieve by trial/error. This can be favourably replaced by numerical analyses. A simulation approach for thermoforming of multilayer thermoplastic is presented. Each prepreg layer is modelled by semi-discrete shell elements. These elements consider the tension, in-plane shear and bending behaviour of the ply at different temperatures around the fusion point. The contact/friction during the forming process is taken into account using forward increment Lagrange multipliers. A lubricated friction model is implemented between the layers and for ply/tool friction. Thermal and forming simulations are presented and compared to experimental results. The computed shear angles after forming and wrinkles are in good agreement with the thermoforming experiment. It will be shown by the comparison of two simulations that the temperature field play an important role in the process success.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part B: Engineering - Volume 52, September 2013, Pages 127-136
Journal: Composites Part B: Engineering - Volume 52, September 2013, Pages 127-136
نویسندگان
Peng Wang, Nahiène Hamila, Philippe Boisse,