کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7216172 1469643 2018 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The effect of indentation sequence on rock breakages: A study based on laboratory and numerical tests
ترجمه فارسی عنوان
اثر توالی انداختن در شکست سنگ: مطالعه بر اساس آزمایش های آزمایشگاهی و عددی
کلمات کلیدی
توالی قطعه، انتشار کراک، تکامل استرس، بازده اندام،
ترجمه چکیده
سنگ ممکن است پاسخ متفاوت به بارهای خارجی اعمال شده در توالی های مختلف است. به این ترتیب، آزمایشهای اندام به منظور بررسی تأثیر توالی اندام بر روی شکست سنگ انجام شد. تداخل های متوالی، مصرف انرژی کم تر اندام، معمولا به شیارهای بزرگتر و عمیق تر منجر می شود و سپس منجر به کاهش انرژی خاصی می شود. به این ترتیب، نتیجه گیری می کنیم که جاذبه های ترتیبی به جای انعطاف های همزمان، از شیارهای بزرگتر با انرژی اندام مشابه تشکیل می شوند. برای تأیید بیشتر این نتیجه، ما یک سری آزمایش های عددی انجام دادیم. تجزیه و تحلیل عددی تکاملی استرس نشان می دهد که برای تکه های همزمان، انتشار یک کرک داخلی از یک لبه داخلی باعث انتشار سایر کرک های داخلی از لایه داخلی دیگر شده است. با این حال، الگوی تراش برای تکه های ترتیبی متغیر است. در اولین فرایند افتادن، یک کرک داخلی، شروع از یک لایه داخلی، معمولا با یک کرنش داخلی ناشی از دندانه دوم مرتبط می شود. زاویه انحراف از ترک های داخلی برای قطب های ترتیبی به دلیل استرس کم فشاری در جهت افقی کوچکتر بود. سپس، این زوایای انحراف کوچکتر منجر به تراشه های بزرگتر شد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی
Rock may response differently to external loads applied in different sequences. Thus, we conducted indentation tests to investigate the effect of the indentation sequence on rock breakages. Sequential indentations, consuming less indentation energy, usually resulted in larger and deeper grooves and then led to lower specific energies. Thus, we conclude that sequential indentations occur instead of simultaneous indentations form larger grooves with the same indentation energy. To further validate this conclusion, we performed a series of numerical tests. The numerical analysis of stress evolution shows that, for simultaneous indentations, the propagation of an internal crack from an inner rim restrained the propagation of the other internal crack from the other inner rim. However, the chipping pattern varied for sequential indentations. In the first indentation process, an internal crack, initiating from an inner rim, is usually connected with an internal crack caused by the second indentation. The deflection angles of the internal cracks for the sequential indentations were smaller because of the lower compressive stress in the horizontal direction. Then, these smaller deflection angles led to larger chips.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Comptes Rendus Mécanique - Volume 346, Issue 1, January 2018, Pages 26-38
نویسندگان
, ,