کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7220751 | 1470330 | 2015 | 40 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influences of welding parameters on the quality and creep properties of friction stir welded polyethylene plates
ترجمه فارسی عنوان
تاثیر پارامترهای جوشکاری بر خواص کیفیت و خزش بشقاب های پلی اتیلن جوش داده شده اصطکاک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
پلی اتیلن، اصطکاک جوشکاری تست خزش تند،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
This work aims to investigate the effects of main friction stir welding (FSW) parameters on the quality and creep properties of polyethylene plate joints. Welding variables for analysis were rotational speed, traverse speed, geometry and tilt angle of tool. Indentation creep tests were carried out on weld joints, using a constant load of 1 kg f for 0.5, 2, 5, 15, 30, 60, 90 and 120 min. Also, classical power law, Juhasz, Ashby-Sargent and Mulhearn-Tabor methods were applied for calculating stress exponent values, as a criterion for creep evaluation. The results showed that under special conditions creep resistance of welds are better than that of the base material. Meanwhile, it was found that Mulhearn-Tabor method is the most conservative estimation for assessing the indentation creep behavior of specimens.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 67, 15 February 2015, Pages 369-378
Journal: Materials & Design - Volume 67, 15 February 2015, Pages 369-378
نویسندگان
Sadegh Hoseinlaghab, Seyed Sajad Mirjavadi, Nasser Sadeghian, Iraj Jalili, M. Azarbarmas, Mohammad Kazem Besharati Givi,