کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7220815 | 1470330 | 2015 | 34 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The microstructural evolution and mechanical properties of resistance spot welded Fe-31Mn-3Al-3Si TWIP steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In this study, similar resistance spot weldability of an Fe-31Mn-3Al-3Si Twinning Induced Plasticity (TWIP) steel was investigated. The microstructural evolution was studied by means of optical microscopy (OM) and scanning electron microscopy (SEM) in order to evaluate the effects of experimental conditions on spot welded (RSW) joints. In addition, tensile-shear load bearing capacity of welded materials and failure modes were precisely inspected to determine the mechanical properties and fracture behavior of welded joints. The results illustrated that due to the expulsion phenomenon, optimum welding parameters for the experimental TWIP steel are shifted to lower values. Meanwhile, OM indicated that the fusion zone (FZ) held a dendritic structure; however, heat affected zone (HAZ) exhibited a significant grain growth in the narrow band. At upper welding parameters, shrinkage cavities and, in certain specimens, in microscopic scale inter-dendritic micro-pores were observed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 67, 15 February 2015, Pages 571-576
Journal: Materials & Design - Volume 67, 15 February 2015, Pages 571-576
نویسندگان
M.H. Razmpoosh, M. Shamanian, M. Esmailzadeh,