کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7221285 1470345 2013 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters
چکیده انگلیسی
In this research Al-Mg and CuZn34 alloys were lap joined using friction stir welding during which the aluminum alloy sheet was placed on the CuZn34 and the process parameters were optimized using Taguchi L9 orthogonal design of experiments. The rotational speed, tool tilt angle and traverse speed were the parameters taken into consideration. The optimum process parameters were determined with reference to tensile shear strength of the joint. The predicted optimal value of tensile strength was confirmed by conducting the confirmation run using optimum parameters. Analysis of variance showed that rotational speed is the most dominant factor in deciding the joint soundness. Optical microscopy and scanning electron microscopy (SEM) analysis were used to probe the microstructures and chemical compositions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design (1980-2015) - Volume 52, December 2013, Pages 587-592
نویسندگان
, , , ,