Moment method analysis of charge distribution & capacitance for the dielectric coated tilted plates isolated in free space

This paper presents a method for the evaluation of the capacitance of the dielectric coated metallic plates forming a corner using the method of moments based on the pulse basis function and the point matching. Two integral equations are formed based on the boundary conditions for the potential on the conductor surface and continuity of the normal component of the displacement flux density at the dielectric-free space interface. A set of simultaneous equations are formed from the two integral equations using the method of moments. The total free charge on the conductor surface is found from the solution of the set of simultaneous equations. Numerical data on the capacitance and the charge distribution are presented. The validity of the analysis has been justified by comparing the data on the capacitance that is available in the literature for a metallic structure with the data on the capacitance computed with the present method for a similar structure considering a very low dielectric constant as well as a very thin dielectric coating. Further validation has been carried out by comparing the capacitance data of the specific case when the angle between two metallic plates is 180° forming a dielectric coated metallic rectangular plate for which the capacitance data are available in the literature.

► Charge distribution of the dielectric coated inclined plates.
► Capacitance of the dielectric coated inclined plates.
► Method of Moment analysis of the dielectric coated inclined plates for capacitance.