Numerical simulations of electro-thermo-convection and heat transfer in 2D cavity

In this article the electro-thermo-convective phenomena in a dielectric liquid enclosed in a 2D cavity and subjected to the simultaneous action of an electric field and a thermal gradient is studied. We solved directly the full set of coupled equations of Electro-Hydro-Dynamic (EHD) and energy equation using a finite volume method. In order to characterize the influence of the electric field on heat transfer the liquid is first heated (from a lateral wall) till the thermal steady state is obtained and then the electric potential and injection of electric charge is applied. Two cases of injection are considered: from the lower electrode and from a lateral wall (left or right). The flow pattern and Nusselt number strongly depend on the non-dimensional characteristic parameters: electrical parameter, Rayleigh number, Prandtl number and mobility parameter M. The convective motion passing from a purely thermal convection to a purely electrical convection and the number of electro-thermo-convective rolls patterns are investigated.As a consequence of the analysis of the combined effect of electric and thermal fields on the flow structure and on Nusselt number, we have also evaluated the heat transfer enhancement due to electroconvection. It is shown that the injection of electric charge increases the heat transfer and Nusselt number is independent of Rayleigh number for high enough values of T.