Cathode-sheath driven low-speed aerodynamic flow actuation using direct-current surface glow discharges

Flow actuation by a continuous/pulsed, direct-current (DC) surface glow discharge is explored. The discharge comprises an array of pin electrode pairs flush mounted on a dielectric actuator surface that lies adjacent to stagnant air. Strong electrostatic fields produced in the cathode sheath region of the discharge provides a motive force on the ions which in turn drag the background gas resulting in directed air flow from the anode to the cathode. The induced flow velocity is estimated by particle image velocimetry (PIV) at 10 Hz with TiO2 seeding. For a pulsed DC discharge with peak power of 5 W per electrode pair, the induced flow velocity reaches peak values of about 1.7 m/s which is comparable to dielectric-barrier discharge (DBD) or corona discharge actuators. The actuation effect quantified by the magnitude of induced velocity increases as the pulse frequency increases from 0 to 1 kHz. The actuation effect decreases for further increase in frequency above 1 kHz. Decreased actuation effect at high frequency is accompanied by structural change in the discharge. At fixed frequency of 1 kHz, flow actuation effect is highest for a square wave pulse with a duty cycle of 50% indicating that pulsed DC discharges produces better actuation than continuous DC with a corresponding reduction in energy consumption.