Comparison between hybrid laser-MIG welding and MIG welding for the invar36 alloy

• The total welding time of MIG welding is 8 times that of hybrid laser-MIG welding.
• Material consumption of MIG welding is about 4 times that of hybrid welding.
• The maximum deformation of MIG welding is over 3 times that of hybrid welding.

The invar36 alloy is suitable to produce mold of composite materials structure because it has similar thermal expansion coefficient with composite materials. In the present paper, the MIG welding and laser-MIG hybrid welding methods are compared to get the more appropriate method to overcome the poor weldability of invar36 alloy. According to the analysis of the experimental and simulated results, it has been proved that the Gauss and cone combined heat source model can characterize the laser-MIG hybrid welding heat source well. The total welding time of MIG welding is 8 times that of hybrid laser-MIG welding. The welding material consumption of MIG welding is about 4 times that of hybrid laser-MIG welding. The stress and deformation simulation indicate that the peak value of deformation during MIG welding is 3 times larger than that of hybrid laser-MIG welding.