کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
734383 | 1461641 | 2014 | 11 صفحه PDF | دانلود رایگان |
• We visualize the dynamics of the molten pool during welding by using a CCD camera.
• We monitor the stability of the plasma zone by using a spectrometer.
• Spatters during welding results in the instability of the plasma plume.
• The calculated electron temperature is proportional to the weld-bead features.
The laser hot-wire welding process was investigated in this work. The dynamics of the molten pool during welding was visualized by using a high-speed charge-coupled device (CCD) camera assisted by a green laser as an illumination source. It was found that the molten pool is formed by the irradiation of the laser beam on the filler wire. The effect of the hot-wire voltage on the stability of the welding process was monitored by using a spectrometer that captured the emission spectrum of the laser-induced plasma plume. The spectroscopic study showed that when the hot-wire voltage is above 9 V a great deal of spatters occur, resulting in the instability of the plasma plume and the welding process. The effect of spatters on the plasma plume was shown by the identified spectral lines of the element Mn I. The correlation between the Fe I electron temperature and the weld-bead shape was studied. It was noted that the electron temperature of the plasma plume can be used to real-time monitor the variation of the weld-bead features and the formation of the weld defects.
Journal: Optics & Laser Technology - Volume 57, April 2014, Pages 66–76