Switching of one beam by another in a Kerr type nonlinear Mach–Zehnder interferometer

This paper investigates switching of one beam by another in a Kerr type nonlinear Mach–Zehnder interferometer (NMZI) with two input ports and one output port. The present investigation has been carried out using the beam propagation method (BPM). The paper presents a detailed account on the procedures used to choose the parameters of the NMZI to make it behave like a NOT gate (inverter), an AND gate, an amplifier and a wavelength converter. The paper also gives details on the manipulation of the operating inputs of the NMZI to desired values. It is shown that the operating values of both the inputs of the NMZI can simultaneously be increased/decreased by decreasing/increasing the nonlinearity coefficient of nonlinear arm of the NMZI. Variation of NMZI length varies the operating value of only the first input, keeping the second unchanged, while variation of NMZI offset varies the operating value of only the second, keeping the first unchanged. The paper also gives a detailed account on amplification of the NMZI amplifier/wavelength converter. The present investigation is useful from the scientific as well as engineering point of view.