کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
735165 | 893576 | 2010 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Micromachining of metals with ultra-short Ti-Sapphire lasers: Prediction and optimization of the processing time
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی برق و الکترونیک
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
We investigate the processing times of ultrafast laser machining in the case of metals (copper and stainless steel). At a fluence of 2.5 J/cm2, measurements of processing times are in good agreement with the calculations based on the ablation rates. We study the influence of laser repetition rates for 1, 5, 10 and 15 kHz. A linear reduction of the processing time can be expected with an increase of the repetition rate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optics and Lasers in Engineering - Volume 48, Issue 3, March 2010, Pages 268–271
Journal: Optics and Lasers in Engineering - Volume 48, Issue 3, March 2010, Pages 268–271
نویسندگان
D. Bruneel, G. Matras, R. Le Harzic, N. Huot, K. König, E. Audouard,