Development of a laser-based measurement system for evaluation of the scraping workpiece quality

A laser-based measurement system for evaluation of the scraping workpiece quality that can eliminate contact-induced measurement errors and increase measurement accuracy is proposed. The laser-based measurement system comprises a light-scattering-type triangulation laser, a computer numerical control (CNC) machine tool, and an analog-to-digital (A/D) card. The triangulation laser measures the depth of the scraping spots and the CNC machine tool locates their position. The 3D data of the scraping workpiece is then drawn using the least squares method. Cast iron and Turcite workpieces can be measured. Five parameters of the scraping workpiece, namely peak points per square inch, percentage of points, distribution of heights of points or depth of surroundings, edge shape of the grooves, and flatness, can be evaluated. The scanning rate and sampling rate of the laser-based measurement system are 100 mm/s and 10 KHz, respectively. In the future, an appliance machine based on the proposed system will be designed for the on-line detection of scraping workpieces.

► A laser-based measurement system for evaluation of the scraping workpiece quality has been proposed.
► The measurement system is a scientific method for comparing with the traditional method.
► The least squares method is used to compensate the tilting scraped surface of the workpiece.
► The measurement system can significantly evaluate main parameters of scraping workpiece.
► New evaluation methods to these parameters of scraping workpiece are proposed for the first time ever.