کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
739097 1461624 2015 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Wide spectral range multiple orders and half-wave achromatic phase retarders fabricated from two lithium tantalite single crystal plates
ترجمه فارسی عنوان
طیف گسترده ای از طیف های مختلف سفارشات و نیمه موج بازدارنده های فشرده فاز تولید شده از دو صفحه کریستال تانتالیت لیتیوم
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی برق و الکترونیک
چکیده انگلیسی


• Birefringence along x- and y-cuts in lithium tantalite single crystal is measured.
• Wavenumber difference method is used to calculate the birefringence.
• The obtained birefringence data is checked by applying Jones vector method.
• Multiple order half- and quarter-wave plates are known across broad spectral range.
• An achromatic half-wave plate working at 598 nm with range 300–900 nm is obtained.

In a broad spectral range (300–2500 nm), we report the use of channeled spectra formed from the interference of polarized white light to extract the dispersion of the phase birefringence Δnp(λ) of the x- and y-cuts of lithium tantalite (LiTaO3:LT) plates. A new method named as wavenumber difference method is used to extract the spectral behavior of the phase birefringence of the x- and y- cuts of LT plates. The correctness of the obtained birefringence data is confirmed by using Jones vector method through recalculating the plates thicknesses. The spectral variation of the phase birefringence Δnp(λ) of the x- and y-cuts of LT plates is fitted to Cauchy dispersion function with relative error for both x- and y-cuts of order 2.4×10−4. The group birefringence dispersion Δng (λ) of the x- and y-cuts of LT plates is also calculated and fitted to Ghosh dispersion function with relative error for both x- and y-cuts of order 2.83×10−4. Furthermore, the phase retardation introduced by the x- and y-cuts of LT plates is also calculated. It is found that the amount of phase retardation confirms that the x- and y-cuts of LT plates can act as a multiple order half- and quarter-wave plates working at many different wavelengths through the spectral range 300–2500 nm. For the x- and y-cuts of LT plates, a large difference between group and phase birefringence is observed at a short wavelength (λ=300 nm); while such difference progressively diminished at longer wavelength (λ=2000 nm). In the near infrared region (NIR) region (700–2500 nm), a broad spectral full width at half maximum (FWHM) is observed for either x- or y-cut of LT plate which can act as if it is working as a zero order wave plate. Finally, an achromatic half-wave plate working at 598 nm and covering a wide spectral range (300–900 nm) is demonstrated experimentally by combining both x- and y-cuts of LT plates.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optics & Laser Technology - Volume 74, November 2015, Pages 108–118
نویسندگان
,