کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
750699 | 1462078 | 2015 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: A reversible fluorescent chemosensor for iron ions based on 1H-imidazo [4,5-b] phenazine derivative A reversible fluorescent chemosensor for iron ions based on 1H-imidazo [4,5-b] phenazine derivative](/preview/png/750699.png)
• We synthesized a novel sensor never reported and explored the interaction of the sensor and Fe3+ by MS, and fluorescence spectra.
• The fluorescence revealed that receptor G1 is an excellent sensor in the recognition to Fe3+ and H2PO4− selectively.
• The reversibility and selectivity of G1/G1 + Fe3+ toward Fe3+/H2PO4− ions as a sequence dependent molecular keypad lock using the G1, Fe3+ and H2PO4− as three different chemical inputs.
• The test strips were containing G1 were fabricated, which also shows a highly sensitively to Fe3+ and H2PO4−.
• The sensor G1 serves as a recyclable component in sensing materials.
Two kinds of fluorescent sensors (G1 and G2) for Fe3+ bearing 1H-imidazo [4,5-b] phenazine derivatives have been designed and synthesized. G1 can display ON-OFF-type fluorescence charged with high selectivity and sensitivity toward Fe3+ in DMSO solutions. And other cations, including Hg2+, Ag+, Ca2+, Co2+, Ni2+, Cd2+, Pb2+, Zn2+, Cr3+, and Mg2+ had no influence on the probing behavior. The detection limit of the sensor G1 towards Fe3+ is 2.860 × 10−7 M. Once combined with Fe3+, G1 displayed high specificity for H2PO4−. Furthermore, in the situ generated G1–Fe3+ ensemble could recover the enhanced fluorescence upon the addition of H2PO4− resulting in an ON-OFF-ON sensing with a detection limit of 1.866 × 10−7 M in the same medium. Notably, this sensor serves as a recyclable component in sensing materials. The reversibility and selectivity of G1/G1 + Fe3+ toward Fe3+/H2PO4− ions as a sequence dependent molecular keypad lock using the G1, Fe3+ and H2PO4− as three different chemical inputs. In addition, the test strip based on G1 was fabricated, which could act as a convenient and efficient Fe3+ test kit.
A new fluorescent molecular sensor G1 was designed and synthesized by a cheap sensitive method and exhibited single selectivity by naked-eyes under the 365 nm UV lamp on recognition for Fe3+ and H2PO4− in DMSO solution.Figure optionsDownload as PowerPoint slide
Journal: Sensors and Actuators B: Chemical - Volume 213, 5 July 2015, Pages 501–507