کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
750811 | 1462083 | 2015 | 7 صفحه PDF | دانلود رایگان |
• The ERGO film with the same direction and preferred vertical orientation was presented.
• The ERGO film can be applied as a sensitive voltammetric sensor for determination of taxifolin.
• The proposed sensor exhibited an excellent selectivity, stability, reproducibility and repeatability.
The electrodeposition of reduced graphene oxide (ERGO) film with preferred vertical orientation was fabricated on a glassy carbon electrode by using pulse potential method in a graphene oxide colloidal solution. Using square wave adsorptive stripping voltammetry (SWASV), the ERGO film was applied for the first time, in developing a high-sensitive electrochemical sensor for detection of taxifolin. Compared with bare glassy carbon electrode (GCE), the resulting electrodes (ERGO/GCE) exhibited excellent response toward the redox of taxifolin by significantly enhancing the redox peak currents and decreasing the peak-to-peak separation. Under the selected conditions, the peak currents were linear relationship with taxifolin concentration in the range of 1.0 × 10−8–1.0 × 10−6 mol L−1, with detection limit of 2.0 × 10−9 mol L−1. Besides, the ERGO/GCE also exhibited an excellent selectivity, stability, reproducibility and repeatability.
Figure optionsDownload as PowerPoint slide
Journal: Sensors and Actuators B: Chemical - Volume 208, 1 March 2015, Pages 188–194