کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
754735 | 895882 | 2013 | 13 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Average beamforming in reverberant fields: Application on helicopter and airplane cockpits Average beamforming in reverberant fields: Application on helicopter and airplane cockpits](/preview/png/754735.png)
The aim of this paper is to present the applicability of the average beamforming (ABF) as a helpful technique to map acoustic emission for interior noise in which we can assume that sources exist only on the wall, but not in the internal volume.In these conditions conventional beamforming measurements show disturbing pseudo-sources in the acoustic maps due to internal reflections that are erroneously interpreted by the algorithm: these pseudo-sources are in many cases also stronger than the real one.The proposed procedure consists in carrying out subsequent conventional beamforming measurements from different known locations which are combined in statistic sense: through both the wider “virtual” array obtained and the map of sample standard deviation of single measurement a great improvement in the resolution and in the map quality is achieved, with a very good accuracy and robustness, eliminating internal reflections.The uncertainty of the proposed strategy is also analyzed.
► We present the application of Average beamforming technique to the 3D reverberating environment.
► It was tested on the cockpit of an airplane and of a helicopter.
► The technique allows an improvement of resolution and the rejection of wall reverberation.
► A test was done to demonstrate the capabilities of the technique.
► Tests were done with vibration and/or external acoustic excitations reproducing real cases.
Journal: Applied Acoustics - Volume 74, Issue 1, January 2013, Pages 198–210