Prediction of flow-generated noise produced by acoustic and aerodynamic interactions of multiple in-duct elements

Flow-generated noise problem caused by in-duct elements is due to the complicated acoustic and turbulent interactions of multiple in-duct flow noise sources. The approach of partially coherent sound fields used previously by Mak and Yang [C.M. Mak, J. Yang, Flow-generated noise radiated by the interaction of two strip spoilers in a low speed flow ducts, Acta Acust united with Acustica 88 (2002) 861–868] and Mak [C.M. Mak, A prediction method for aerodynamic sound produced by multiple elements in air ducts, J Sound Vib 287 (2005) 395–403] is adopted to formulate the sound powers produced by interactions of multiple elements at frequencies below and above the cut-on frequency of the lowest transverse duct mode. The study indicates that the level and spectral distribution of the additional acoustic energy produced by the interactions of multiple elements can be predicted based on the measured data with respect to the interactions. The proposed method can form a basis of a generalized prediction method for flow-generated noise produced by multiple elements. The application of the proposed method is supported by two engineering examples.