کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
755575 | 1462544 | 2009 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Pressure Measurement on Suction Surface of a Single Vane Using Pressure-sensitive Paint Pressure Measurement on Suction Surface of a Single Vane Using Pressure-sensitive Paint](/preview/png/755575.png)
Global pressure distribution on the suction surface of a single vane in a transonic cascade wind tunnel is measured with the help of intensity-based pressure-sensitive paint (PSP) technique using a type of temperature-insensitive fluorescent paint and a self-made measurement system. This measurement is conducted at the outlet of the cascade wind tunnel at the Mach numbers 0.3 and 0.4, attack angle about −20°, ambient pressure 95.4 kPa and temperature 15 °C. The vane under study owns a large camber angle of about 40° and 4×10 pressure ports on its suction surface with a steel cubic stand attached. It is fixed vertically on the lower guide steel plate at the outlet through the stand for convenient acquisition of images. Conventional electronic static pressure (ESP) measurement is also fulfilled simultaneously with an ESP scanner for comparison. The method of intensity-based PSP technique is introduced, especially, with the self-made PSP system. The operating sequence of PSP measurement for improved accuracy is also proposed. The practical steps of image processing are described. As an image registration, target alignment is introduced after the 4×10 pressure ports have been selected as targets. The comparison of PSP results with ESP data shows that the maximum error remains within 6.5%.
Journal: Chinese Journal of Aeronautics - Volume 22, Issue 2, April 2009, Pages 138-144