کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
760858 896572 2016 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Improvement of sound source localization in a finite duct using beamforming methods
ترجمه فارسی عنوان
بهبود محلی سازی منبع صدا در کانال نهایی با استفاده از روش های پرتو ارتقاء
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
This paper presents work to identify the sound source location within a finite length duct with beamforming methods. Two types of problems were studied in this paper. First, the deconvolution approach for the mapping of acoustic sources (DAMAS) method is applied to minimize the side-lobe effects, and improve the spatial resolution at low frequencies. Second, the beamforming results may deteriorate when the sound frequency is close to the cut-on frequencies. In order to improve the results, an algorithm was developed. To validate the methods, both simulations and experiments were implemented. In the experiments, a synchronized system with forty-eight wall-mounted microphones in a finite length duct was established. The dependence of the azimuthal sound source localization and the planar sound source localization on the measurement frequency was studied. The results indicate that the accuracy of the localization is highly dependent on the number of the spinning modes that are able to propagate in the duct. The localization may fail when the frequency is close to the cut-on frequencies. Significant improvements can be achieved when DAMAS and the improved algorithm are implemented.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Applied Acoustics - Volume 103, Part A, February 2016, Pages 37-46
نویسندگان
, , ,