A block LU-SGS implicit unsteady incompressible flow solver on hybrid dynamic grids for 2D external bio-fluid simulations

A hybrid dynamic grid generation technique for two-dimensional (2D) morphing bodies and a block lower–upper symmetric Gauss–Seidel (BLU-SGS) implicit dual-time-stepping method for unsteady incompressible flows are presented for external bio-fluid simulations. To discretize the complicated computational domain around 2D morphing configurations such as fishes and insect/bird wings, the initial grids are generated by a hybrid grid strategy firstly. Body-fitted quadrilateral (quad) grids are generated first near solid bodies. An adaptive Cartesian mesh is then generated to cover the entire computational domain. Cartesian cells which overlap the quad grids are removed from the computational domain, and a gap is produced between the quad grids and the adaptive Cartesian grid. Finally triangular grids are used to fill this gap. During the unsteady movement of morphing bodies, the dynamic grids are generated by a coupling strategy of the interpolation method based on ‘Delaunay graph’ and local remeshing technique. With the motion of moving/morphing bodies, the grids are deformed according to the motion of morphing body boundaries firstly with the interpolation strategy based on ‘Delaunay graph’ proposed by Liu and Qin. Then the quality of deformed grids is checked. If the grids become too skewed, or even intersect each other, the grids are regenerated locally. After the local remeshing, the flow solution is interpolated from the old to the new grid. Based on the hybrid dynamic grid technique, an efficient implicit finite volume solver is set up also to solve the unsteady incompressible flows for external bio-fluid dynamics. The fully implicit equation is solved using a dual-time-stepping approach, coupling with the artificial compressibility method (ACM) for incompressible flows. In order to accelerate the convergence history in each sub-iteration, a block lower–upper symmetric Gauss–Seidel implicit method is introduced also into the solver. The hybrid dynamic grid generator is tested by a group of cases of morphing bodies, while the implicit unsteady solver is validated by typical unsteady incompressible flow case, and the results demonstrate the accuracy and efficiency of present solver. Finally, some applications for fish swimming and insect wing flapping are carried out to demonstrate the ability for 2D external bio-fluid simulations.