Flow Field Investigation in a Trapezoidal Duct with Swirl Flow Induced by Impingement Jets

An enlarged model of trapezoidal duct near the leading-edge in the blade is built up. The effects of impingement jets, swirl flow, cross flow and effusion flow are considered. Experiments are performed to measure flow fields in this confined passage and exit holes on one of its side walls. Cross flow and effusion flow are induced in the channel by the outflow of side exit hole (SEH) and film cooling hole (FCH), which are oriented on one end wall and bottom wall of the passage. Detailed flow structures are measured for two impingement angles of 35° and 45° with 6 combinations of outflow ratios. Results show that the small jets impinge the target wall effectively while the large jets contribute to inducing and impelling a strong counter-clockwise vortex in the upper part of the passage. Cross flow plays a dominate role for the flow structures in the passage and exit holes. It deflects jets, enhances swirl and deteriorates side exit conditions. Impingement angle is another significant factor for the flow characteristics. Its effect reveals more evidently with cross flow. Within the present test conditions, the mass flow rates and outflow positions of FCHs have no distinct effect on the main flow structures.