کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
766580 | 1463084 | 2015 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fracture toughness measurements using two single-edge notched bend test methods in a single specimen
ترجمه فارسی عنوان
اندازه گیری چقرمگی شکستگی با استفاده از دو روش آزمون خم برشی یک لبه در یک نمونه واحد
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
SE(B) testing was conducted at room temperature on an X70 pipe material. Two toughness methods - ASTM E1820 and the double-clip gauge method - were combined in a single specimen to experimentally compare the J-conversion CTOD of ASTM E1820 with the geometrically-estimated CTOD under identical conditions. The results show that the difference in definition of CTOD strongly influences CTOD estimations. The paper discusses details of the experiment and the results.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Fracture Mechanics - Volume 144, August 2015, Pages 78-88
Journal: Engineering Fracture Mechanics - Volume 144, August 2015, Pages 78-88
نویسندگان
Dong-Yeob Park, Jean-Philippe Gravel,