An approximation for the cyclic state of stress ahead of cracks and its implications under fatigue crack growth

Numerical methods are mostly used in the field of fatigue to derive the stress intensity factor (SIF) or J-integral solutions to be employed in damage tolerance analysis of cracked components. In this frame, simple assumptions about material properties are taken into account.More refined approaches try to describe the plasticity-induced crack closure in order to account for retardation effects under variable amplitude loading. In these approaches, the cyclic plasticity is used and cyclic finite element analyses are carried out.In the present work, a novel strategy is presented for the calculation of the relevant parameters to the fatigue crack growth, based on the evaluation of local field parameters (J-integral, T-stress) and cyclic material properties. It is demonstrated that, in case of mild steels and under the assumption of a stress ratio R = −1, the global constraint factor αg widely employed in fatigue crack growth algorithms such as the strip-yield model, can be calculated in a closed-form on the basis of the expression of the crack-tip fields. Moreover, αg provides a reasonable explanation of the fatigue crack growth behaviour of the A1N steel for different geometrical and loading configurations. Further investigations carried out on different medium and high strength steel grades show that the plastic radius ahead of small and long cracks at their fatigue limits can be considered as a constant for the material.