کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
767889 | 897233 | 2009 | 14 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: A criterion for brittle fracture in U-notched components under mixed mode loading A criterion for brittle fracture in U-notched components under mixed mode loading](/preview/png/767889.png)
A failure criterion is proposed for brittle fracture in U-notched components under mixed-mode static loading. The criterion, called UMTS, is developed based on the maximum tangential stress criterion and also a criterion proposed in the past for mode I failure of rounded V-shaped notches [Gomez FJ, Elices M. A fracture criterion for blunted V-notched samples. Int J Fracture 2004;127:239–64]. Using the UMTS criterion, a set of fracture curves are derived in terms of the notch stress intensity factors. These curves can be used to predict the mixed mode fracture toughness and the crack initiation angle at the notch tip. An expression is also obtained from this criterion for predicting fracture toughness of U-notched components in pure mode II loading. It is shown that there is a good agreement between the results of UMTS criterion and the experimental data obtained by other authors from three-point bend specimens.
Journal: Engineering Fracture Mechanics - Volume 76, Issue 12, August 2009, Pages 1883–1896