Analytical and numerical study of cohesive zones for a crack in an adhesive layer between identical isotropic materials

A crack in a thin adhesive elastic-perfectly plastic layer between two identical isotropic elastic half-spaces is considered. Uniformly distributed normal stress is applied to the substrates at infinity. First, stress distribution in the cohesive zones and the J-integral values are defined numerically by the finite element method (FEM). Further, a mathematical formulation of the problem is given and its analytical solution is proposed. It is assumed that, at the crack continuations, there exist cohesive zones. The interlayer thickness is neglected since it is much smaller than the crack length. The distribution of the normal stress, which was obtained by means of the FEM, is now approximated by a piecewise-constant function and assumed to be applied at the faces of the cohesive zones. The formulated problem is solved analytically and an equation for determination of the cohesive zone lengths is derived. Also, closed expressions for the crack tip opening displacement and for the J-integral are obtained in an analytical form. These parameters are found with respect to the values of the normal stress applied at infinity. Finally, a universal approximating function, which describes the stress distribution in the cohesive zones, is constructed. This function depends on the ratio between the interlayer thickness and the crack length and on the ratio between the normal stress applied at infinity and the yield limit of the interlayer’s material. Once again, the problem is solved analytically, but this time for the stress distribution prescribed by the universal approximating function. The cohesive zone lengths, the values of the crack tip opening displacement and of the J-integral are calculated. A comparative analysis of the obtained results is carried out. A good agreement of the J-integral values calculated by means of the developed analytical models and by the associated finite element analysis is demonstrated.