کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
773632 | 1463540 | 2007 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Enhancement of adhesive joint strength by laser surface modification
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
This report describes modification of titanium surfaces by means of a laser ablation process that generates microcolumnar arrays (MCA) and thereby increases the adhesive bond strength between titanium plates in many ways. Bond strength improves due to (i) increase in surface area, (ii) mechanical locking of adhesive between microcolumns, and (iii) modifications in the surface chemistry of the adherend and consequent improvement in wettability of adherend/adhesive interface. Due to the enhancement in bond strength, failure of joints moves away from interfaces into the bulk of the adhesive layer, suggesting that the strength-limiting factor is the epoxy strength.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 27, Issue 4, June 2007, Pages 268–276
Journal: International Journal of Adhesion and Adhesives - Volume 27, Issue 4, June 2007, Pages 268–276
نویسندگان
E.G. Baburaj, D. Starikov, J. Evans, G.A. Shafeev, A. Bensaoula,