Reflection and transmission of plane waves at an imperfectly bonded interface between piezoelectric and piezomagnetic media

The paper analyzes the reflection and transmission of plane waves at an imperfect interface between piezoelectric (PE) and piezomagnetic (PM) media. The materials are assumed to be transversely isotropic. The linear spring model is used to describe the imperfection of bonding behavior at the interface. According to this model, the properties of the interface can be characterized by the normal and tangential interfacial stiffnesses. Numerial examples are performed for BaTiO3/CoFe2O4 material combination. Four cases, a perfect, slip, normal weak bonding and unbonding interfaces for the coupled quasi-pressure (QP) wave incidence from BaTiO3 medium are compared in detail. Numerical results of the reflection and transmission coefficients (RTCs) varying with incident angle for different interfacial stiffnesses are presented. Results show that the transmitted QP/reflected QSV waves are the strongest in the perfect/unbonded cases, respectively. The scattered waves in the slip and normal weak bonding cases are between those of the perfect and unbonded cases generally. Critial angles have noticeable effect on the RTCs and energy coefficients for the coupled scattered waves of the perfect and slip cases but have a little/no effect on those of the normal weak bonding/unbonded cases. It is found that the sum of the energy carried by the transmitted/reflected QP and QSV waves is less than unit for the imperfect bonding between BaTiO3/CoFe2O4 solids. These results may provide some useful reference datum for the imperfection measurment at the PE and PM interface.