کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
776295 | 1463494 | 2013 | 15 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Single lap joints loaded in tension with high strength steel adherends Single lap joints loaded in tension with high strength steel adherends](/preview/png/776295.png)
Single lap joints in many different geometric and material configurations were analysed using finite element analysis and tested in tension. Geometric parameters, such as the overlap length and adherend thickness, together with material parameters such as the adherend and adhesive stress–strain behaviour, were all tested. The mechanisms and modes of failure were observed for different cases, and positions of damage initiation were identified. Failure patterns were related to failure mechanisms. A failure prediction methodology has been proposed and a good correlation was obtained between the experimental and finite element predictions of strength for a variety of joint configurations. The study is presented in two parts. In the first (present paper), high strength steel adherends are considered and in the second paper ductile steel adherends are studied. For high strength steel adherends and a relatively short overlap, failure is dominated by adhesive global yielding. As the overlap gets longer, however, failure is no longer due to global yielding, but due to high local shear strains.
Journal: International Journal of Adhesion and Adhesives - Volume 43, June 2013, Pages 81–95