Interfacial stresses in FRP-plated RC beams: Effect of adherend shear deformations

A recently popular method for retrofitting reinforced concrete (RC) beams is to bond fibre reinforced polymer (FRP) plates to their tensile faces. An important failure mode of such plated beams is the debonding of the FRP plates from the concrete due to high level of stress concentration in the adhesive at the ends of the FRP plate. This paper presents an improved solution for interfacial stresses in a concrete beam bonded with the FRP plate by including the effect of the adherend shear deformations. The analysis is based on the deformation compatibility approach where both the shear and normal stresses are assumed to be invariant across the adhesive layer thickness. In the present theoretical analysis, the adherend shear deformations are taken into account by assuming a parabolic shear stress through the thickness of both the concrete beam and the bonded plate. Numerical results from the present analysis are presented both to demonstrate the advantages of the present solution over existing ones and to illustrate the main characteristics of interfacial stress distributions.