Numerical simulation and experimental validation of the dynamic response of aluminum plates under free air explosions

Protection of buildings against explosions due to terrorism actions or accidents is a growing concern in civil engineering. Full-field measuring techniques as well as finite element simulations are two valuable tools in the hands of engineers to understand the structural mechanisms during blast load events. The research leading to this article is motivated by the fact that only limited knowledge about finite element simulations and experimental validation of structures under free air explosions seems to be available. This article investigates the benefits and accuracy of a finite element simulation of a blast loaded thin aluminum plate by validating the results with small-scale blast loading experiments. Experimental data obtained from 3D high-speed digital image correlation, during the first 7 ms with a frame rate of 25,000 frames per second, is compared with results obtained from the finite element analysis. The influence of different parameters (amongst others: the element type, element size and integration method) with respect to the accuracy of the finite element results is investigated. It is shown that for the modeling of the deformation of the investigated thin plate, the use of shell elements is allowed as the transverse shear strains appear to be sufficiently small. Furthermore, it is concluded that the use of an explicit integration scheme instead of an implicit scheme dramatically reduces the computational effort without significant loss of accuracy.

► The blast response of thin aluminum plates is numerically simulated.
► Validation is based on data obtained from 3D high-speed digital image correlation.
► The FE model of choice uses shell elements and an explicit integration scheme.
► ConWep provides a fast and powerful tool to simulate the reflected pressures.
► The need for improvement of the material parameters is demonstrated.