کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
779990 1464970 2016 33 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Axisymmetric thermo-elastic field in an infinite space containing a penny-shaped crack under a pair of symmetric uniform heat fluxes and its applications
ترجمه فارسی عنوان
میدان مغناطیسی ترموالاستیک در یک فضای بی نهایت حاوی یک کراس پنی شکل تحت یک جفت شار حرارتی متقارن و کاربرد آن
ترجمه چکیده
در این مقاله، مسئله ی جامد ایزوتروپیک بی نهایت ضعیف شده توسط یک جرقه ی پنی شکل است که تحت یک جفت بار شار حرارتی یکسانی قرار می گیرد که به صورت متقارن روی سطوح تراز وسط قرار دارد. متغیرهای سه بعدی درجه حرارت الاستیسیته با استفاده از روش تئوری پتانسیل در شرکت با راه حل جامع جدید به دست آمده است. برخی از مقادیر فیزیکی در هواپیما ترک خورده، مانند دمای، جابجایی شعاعی، جابجایی سطح ترک، استرس طبیعی در قسمت شکاف و شدت تنش است که پارامترهای مهمی در مکانیک شکستن در فرم های بسته ارائه می شود. در چارچوب یک ترموالاستیکی پلاستیکی ایدهآل، دامنه ی پلاستیکی در جبهه ی کروم، توسط مدل کراس دوگدال تعیین می شود که خط مش یی اصلی خط غیر خطی را خطیر می کند. جابجایی سطحی اصلاح شده و استرس طبیعی در خارج از کرک نیز از طریق اصل فوق العاده به دست می آید. محاسبات عددی برای اعتبارسنجی راه حل های موجود انجام می شود و توزیع های میدان های حرارتی مکانیکی محوری را نشان می دهد. راه حل حاضر می تواند به عنوان مرجع برای تکنولوژی مادون قرمز ترموگرافی خدمت کند.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
This paper deals with the problem of an infinite isotropic solid weakened by a penny-shaped crack, which is subjected to a pair of uniform heat flux loadings symmetrically exerted on the upper and lower crack surfaces. Three-dimensional thermo-elastic field variables are obtained by means of potential theory method in company with the newly developed general solution. Some physical quantities on the cracked plane, such as temperature, radial displacement, crack surface displacement, normal stress at the crack front and stress intensity factor, which are important parameters in fracture mechanics, are presented in closed-forms. In the framework of ideal thermo-elasto-plasticity, the extent of the plastic zone at the crack front is determined by the Dugdale crack model, which linearizes the original non-linear problem. The refined crack surface displacement and normal stress outside the crack are also obtained via the principle of superposition. Numerical calculations are carried out to validate the present solutions and to show the distributions of the axisymmetric thermo-mechanical fields. The present solution could be served as a reference for the infrared-thermography technique.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Mechanical Sciences - Volumes 115–116, September 2016, Pages 634-644
نویسندگان
, , ,