کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
780212 | 1465010 | 2013 | 11 صفحه PDF | دانلود رایگان |
In this study, a frequency-based technique is presented to detect any number of localized damages which induce stiffness reduction in a structure. The sensitivity of natural frequencies is characterized as a second order element level function of the stiffness reduction. To achieve accurate results, change in the mode shapes of the structure are expressed as a linear combination of the intact structure mode shapes and are considered to develop sensitivity equations. The overall formulation yields an indeterminate set of equations. An optimization criterion is used to solve these equations to obtain the change of the structural parameters. The method was applied to a truss using numerically simulated data and it was verified using experimentally measured data of a steel cantilever beam and a one-story one-bay frame. Results show the efficiency of the proposed method and the importance of including the changes of the mode shapes through a frequency-based damage detection algorithm and also approve that the method is able to detect damage without an exact model of the undamaged structure.
► A well established sensitivity equation without extra measurement efforts or mathematical complexity.
► Numerical verification of the accuracy of the proposed formulation and comparison with the ordinary used relations.
► Numerical validation of the proposed damage detection method and comparison with the ordinary used methods.
► Experimental verification of the propped method against measurements noise and modeling errors.
Journal: International Journal of Mechanical Sciences - Volume 70, May 2013, Pages 79–89