کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
780614 | 1464544 | 2011 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of off-axis aspheric surfaces using a slow tool servo
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Fabrication of off-axis aspheric surfaces using a slow tool servo Fabrication of off-axis aspheric surfaces using a slow tool servo](/preview/png/780614.png)
چکیده انگلیسی
Off-axis aspheric surfaces have been widely applied in optical systems, but it is difficult to fabricate this kind of optical surface with high quality. Slow tool servo is one of the methods for turning off-axis aspheric surfaces on-axis, which have a large travel range without an additional device. This paper presents a theoretical and experimental investigation on the 3D surface generation in single point diamond tuning using slow tool servo. The form error of off-axis paraboloid caused by tool centering error is analyzed and verified by cutting experiment.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Machine Tools and Manufacture - Volume 51, Issue 5, May 2011, Pages 404–410
Journal: International Journal of Machine Tools and Manufacture - Volume 51, Issue 5, May 2011, Pages 404–410
نویسندگان
Z.Q. Yin, Y.F. Dai, S.Y. Li, C.L. Guan, G.P. Tie,