کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
780616 | 1464544 | 2011 | 8 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Effect of cutter runout on process geometry and forces in peripheral milling of curved surfaces with variable curvature Effect of cutter runout on process geometry and forces in peripheral milling of curved surfaces with variable curvature](/preview/png/780616.png)
This paper presents a novel method for cutting force modeling related to peripheral milling of curved surfaces including the effect of cutter runout, which often changes the rotation radii of cutting points. Emphasis is put on how to efficiently incorporate the continuously changing workpiece geometry along the tool path into the calculation procedure of tool position, feed direction, instantaneous uncut chip thickness (IUCT) and entry/exit angles, which are required in the calculation of cutting force. Mathematical models are derived in detail to calculate these process parameters in occurrence of cutter runout. On the basis of developed models, some key techniques related to the prediction of the instantaneous cutting forces in peripheral milling of curved surfaces are suggested together with a whole simulation procedure. Experiments are performed to verify the predicted cutting forces; meanwhile, the efficiency of the proposed method is highlighted by a comparative study of the existing method taken from the literature.
Journal: International Journal of Machine Tools and Manufacture - Volume 51, Issue 5, May 2011, Pages 420–427