کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
784739 | 1464599 | 2006 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Accuracy improvement of miniaturized machine tool: Geometric error modeling and compensation Accuracy improvement of miniaturized machine tool: Geometric error modeling and compensation](/preview/png/784739.png)
A novel capacitance–sensor based multi-degree-of-freedom (DOF) measurement system has been developed for measuring geometric errors of a miniaturized machine tool (mMT) overcoming the size limitations. In the present work five geometric error components of a three-axis mMT are measured simultaneously along each axis and the squareness errors are determined by the slopes of straightness error profiles. Least-squares fitting method is used to represent the analytical models of geometric errors. A kinematic chain consisting of various structural members of mMT is introduced to establish the positional relationships among its coordinate frames. Based on this kinematic chain a general volumetric error model has been developed to synthesize all geometric error components of a miniaturized machine tool. Then, a recursive compensation method is proposed to achieve error compensation efficiently. Test results show that the positioning accuracy of miniaturized machine tool has been improved with compensation.
Journal: International Journal of Machine Tools and Manufacture - Volume 46, Issues 12–13, October 2006, Pages 1508–1516