کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
785127 | 1465349 | 2012 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Analytical evaluation of the elastic and plastic resistances of double symmetric rectangular hollow sections under axial force and biaxial bending Analytical evaluation of the elastic and plastic resistances of double symmetric rectangular hollow sections under axial force and biaxial bending](/preview/png/785127.png)
In the recent codes for the design of steel structures, the elastic–plastic methods of analysis are recognised to provide an efficient estimation of the ultimate resistance of some of these structures. These methods are usually based on some basic hypotheses, such as the creation of plastic hinges in the most stressed cross-sections, for instance.As the development of these plastic hinges depends on the interaction between the internal forces and on the cross-section shape, specific equations are required for the analysis of different types of cross-sections. However, most frequently, these equations are not available, or they are expressed by means of simplified expressions; this is usually the case when biaxial bending is involved.This paper presents new interaction criteria for the analysis of steel rectangular hollow sections subjected to an axial force and biaxial bending moments, at the elastic or the plastic limit states (as long as buckling phenomena are not involved). The plastic interaction criteria are presented, in a first step, for some particular combinations of the internal forces, such as axial loading with bending about a main axis, and biaxial bending without axial loading. Then, the global solution for the simultaneous combination of an axial force and bending moments about both the main axes of inertia are described in detail. All these plastic interaction criteria are compared with the corresponding plastic criteria adopted in the Eurocode 3 (EC3). Some suggestions are presented in order to improve the results given by these EC3 criteria.
► Exact criteria for RHS under axial force and bending about a main axis.
► Exact criterion for RHS under biaxial bending without axial force.
► Exact criterion for RHS under biaxial bending with axial force.
► Modified EC3 criterion giving better agreement with the exact solutions.
► Position of the neutral axis at the elastic and plastic limit states.
Journal: International Journal of Non-Linear Mechanics - Volume 47, Issue 9, November 2012, Pages 1033–1044