کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
787318 | 1465664 | 2010 | 21 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: A micromechanics based damage model for composite materials A micromechanics based damage model for composite materials](/preview/png/787318.png)
The predictive capacity of ductile fracture models when applied to composite and multiphase materials is related to the accuracy of the estimated stress/strain level in the second phases or reinforcements, which defines the condition for damage nucleation. Second phase particles contribute to the overall hardening of the composite before void nucleation, as well as to its softening after their fracture or decohesion. If the volume fraction of reinforcement is larger than a couple of percents, this softening can significantly affect the resistance to plastic localization and cannot be neglected. In order to explicitly account for the effect of second phase particles on the ductile fracture process, this study integrates a damage model based on the Gologanu–Leblond–Devaux constitutive behavior with a mean-field homogenization scheme. Even though the model is more general, the present study focuses on elastic particles dispersed in an elasto-plastic matrix. After assessing the mean-field homogenization scheme through comparison with two-dimensional axisymmetric finite element calculations, an extensive parametric study is performed using the integrated homogenization-damage model. The predictions of the integrated homogenization-damage model are also compared with experimental results on cast aluminum alloys, in terms of both the fracture strain and overall stress–strain curves. The study demonstrates the complex couplings among the load transfer to second phase particles, their resistance to fracture, the void nucleation mode, and the overall ductility.
Journal: International Journal of Plasticity - Volume 26, Issue 4, April 2010, Pages 549–569