کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
787524 1466117 2009 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Application of normalization method to fracture resistance testing for storage tank A285 carbon steel
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
پیش نمایش صفحه اول مقاله
Application of normalization method to fracture resistance testing for storage tank A285 carbon steel
چکیده انگلیسی

To determine the fracture resistance and its constraint effect for storage tank A285 carbon steel, a set of single edge notched bend (SENB) specimens with different crack lengths are tested under the guideline of ASTM standard E1820. Normalization method is adopted to develop J–R curves by directly using the load versus load-line displacement data without the need for online crack size measurement. For validation, the conventional electric potential drop method is also used to monitor crack extension, and to determine the J–R curves. The results indicate that the crack extension, J–R curves and fracture initiation toughness determined from both methods are nearly identical for the SENB specimens considered.The J–R curves obtained from the A285 SENB specimens show a strong dependence on crack size or fracture constraint. In reference to the J–A2 fracture theory, the constraint effect is quantified by a constraint parameter A2. Through experimental and numerical analyses of the specimens, a constraint-corrected J–R curve is obtained as a function of crack extension and the constraint parameter A2. It is concluded that the normalization method is valid and cost-effective for the determination of J–R curves from both standard and nonstandard SENB specimens. In addition, the parameter A2 can reasonably quantify the constraint effect on the experimental J–R curves.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Pressure Vessels and Piping - Volume 86, Issue 10, October 2009, Pages 669–676
نویسندگان
, , ,