کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7885323 1509746 2015 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Rheological properties of calcium sulfate suspensions
ترجمه فارسی عنوان
خواص رئولوژیکی تعلیق های کلسیم سولفات
ترجمه چکیده
خواص رئولوژیکی ذرات کلرید سولفات انیدریت پراکنده در آب با حضور دو فوق پلاستیسایزر پلیکربوکولیزاسیون مورد بررسی قرار می گیرد. کروماتوگرافی نفوذ ژل به منظور بررسی ساختار مولکولی فوق لایه سازان استفاده می شود. اندازه گیری جریان برش های رئوولیک برای بررسی اثر دو فوق پلاستیسایزر پلی کربوکسیلات و همچنین میزان جامد حجم جامد بر مدول الاستیسیته و استرس عملکرد سوسپانسیون های کلسیم سولفات انجام شده است. با توجه به مقدار محتوای کربن آلاینده، پلیمرهای با ذرات کلسیم سولفات مشخص می شوند. یک پیوند بین رفتار رئولوژیکی تعلیق ها، جذب بر روی ذرات معدنی و وزن مولکولی فوق العاده کننده ها برجسته شده است. توجه ویژه ای به محاسبه فاصله بین قطعه ای در تعلیق به عنوان عملکرد کسر حجم جامد و مقدار فوق العاده پلاستی کننده است. برای این منظور، یک مدل مبتنی بر مفروضات مکانیکی و همگن سازی برای محاسبه نسبت ضخامت لایه پلیمر جذب شده طراحی شده است. نتایج مدل پیشنهادی نشان می دهد که فاصله بین پراکندگی وابسته به کسر حجم جامد و نسبت مخلوط پلیمر است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
The rheological properties of calcium sulfate anhydrite particles dispersed in water are studied in the presence of two polycarboxylate superplasticizers. Gel permeation chromatography is used to investigate the molecular structure of the superplasticizers. Rheological shear flow measurements are carried out to investigate the effect of the two polycarboxylate superplasticizers as well as the solid volume fraction on the elastic moduli and yield stress of calcium sulfate suspensions. The affinity of polymers with calcium sulfate particles is characterized by the determination of Total Organic Carbon contents. A link is highlighted between the rheological behaviour of the suspensions, the adsorption onto mineral particles and the molecular weight of the superplasticizers. Particular attention is taken to compute the interparticle distance in the suspension as a function of the solid volume fraction and the amount of superplasticizer. For this purpose, a model based on mechanical and homogenization assumptions is developed to compute a thickness ratio of the adsorbed polymer layer. Results from the proposed model suggest that the interparticle distance is dependent on the solid volume fraction and the mix-proportion of polymer.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Cement and Concrete Research - Volume 76, October 2015, Pages 70-81
نویسندگان
, , , ,