کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
789568 | 1466445 | 2011 | 12 صفحه PDF | دانلود رایگان |
An expression is determined for the mass of the magnet and magnetocaloric material needed for a magnetic refrigerator and these are determined using numerical modeling for both parallel plate and packed sphere bed regenerators as function of temperature span and cooling power. As magnetocaloric material Gd or a model material with a constant adiabatic temperature change, representing an infinitely linearly graded refrigeration device, is used. For the magnet a maximum figure of merit magnet or a Halbach cylinder is used. For a cost of $40 and $20 per kg for the magnet and magnetocaloric material, respectively, the cheapest 100 W parallel plate refrigerator with a temperature span of 20 K using Gd and a Halbach magnet has 0.8 kg of magnet, 0.3 kg of Gd and a cost of $35. Using the constant material reduces this cost to $25. A packed sphere bed refrigerator with the constant material costs $7. It is also shown that increasing the operation frequency reduces the cost. Finally, the lowest cost is also found as a function of the cost of the magnet and magnetocaloric material.
► Expression for mass of magnet as function of mass of magnetocaloric material proposed.
► Lowest price of magnetic refrigeration device calculated using numerical model.
► Price calculated for different magnet and magnetocaloric material costs.
► Systems with different magnets and magnetocaloric materials are considered.
Journal: International Journal of Refrigeration - Volume 34, Issue 8, December 2011, Pages 1805–1816