کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
791013 | 901909 | 2013 | 9 صفحه PDF | دانلود رایگان |
The dies used in the extrusion of nickel based super alloys are subject to severe mechanical and thermal stresses, resulting in shortened life and high manufacturing costs. It is necessary to understand the dominant damage mode in order to guide improvements for increased tool life. The operation under examination consists of the hot extrusion of a nickel based superalloy using nitrided hot work tool steel, glassed workpieces and graphite lubrication. The investigation was conducted through a combination of metallurgical analysis, metrology and finite element analysis. Out of the damage modes observed under these conditions, the plastic deformation of the substrate was found to be the cause for tool failure. This paper discusses the relationship between plastic deformation of the substrate and the formation of scoring marks, which fail the die.
Journal: Journal of Materials Processing Technology - Volume 213, Issue 1, January 2013, Pages 111–119