Efficiency Evaluation of Biofilter for Hydrogen Sulfide Removal from Palm Oil Mill Biogas

Hydrogen sulfide (H2S) is one of the most problematic contaminants in biogas. The removal of H2S from biogas is necessary in order to clean biogas and prevent gas engine. The efficiency evaluation on H2S removal from palm oil mill biogas by biofilter was investigated. Eight sludge samples from biofilter systems of palm oil mill biogas were tested for H2S removal by grown in thiosulfate mineral medium under an anaerobic condition at atmospheric pressure. Analytical data demonstrated that average amounts of CH4, CO2, and H2S in inlet biogas were 62%, 35%, and 0.95%, respectively. The highest H2S removal rate of 0.35 g/L/d was found sludge A (Asian palm oil company). It also found that the major product for sludge A was elemental sulfur of 13,650 mg/L and could produce the highest sulfate concentration of 300 mg/L. In contrast, sludge I (Thai Indo palm oil factory) has the lowest H2S removal with rate (0.09 g/L/d.) Microbial activity for H2S removal was increased with the decrease in pH from 7.12 to 6.40 due to H2S dissolved medium. The suitable condition for the growth of sulfur oxidizing bacteria affected on H2S removal efficiency from palm oil mill biogas by biofilter systems.