Variations of PV module parameters with irradiance and temperature

This paper presents a comparison of common and well-documented methods for varying the single-diode model parameters extracted at standard test conditions (STC) of a PV module to suit varying operating conditions of irradiance and temperature. To perform such a comparison, accurate values of the single-diode parameters at STC are required. These were obtained using well-established numerical and iterative methods. The Newton-Raphson method was found to be most accurate for obtaining these parameters at STC. Consequently, these parameters were used to compare the methods of varying the single-diode model parameters with temperature and irradiance. MATLAB software has been developed to evaluate the performance of each method using the Shell SQ150 PV module. Results are compared with measured data and discussion of the accuracy of various methods is presented.