کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
791923 | 1466784 | 2006 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Study on vibration-EDM and mass punching of micro-holes
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Study on vibration-EDM and mass punching of micro-holes Study on vibration-EDM and mass punching of micro-holes](/preview/png/791923.png)
چکیده انگلیسی
In this research vibration-EDM is realized by the vibrating worktable designed, which is employed in the micro-punching machine we had already developed. It is found that larger feed and better surface finish can be achieved in micro-EDM with vibration machining. Circular and noncircular micro-electrodes of diameter below 200 μm were fabricated with vibration-EDM and the setup of u-axis. Experiments to punch micro-holes of diameter 200 μm on SUS304 stainless steel and brass strips were carried out. Mass punching of micro-holes on brass strip was performed successfully, using the automatic feeding system developed. The capability of micro-punching and effects of parameters on the quality of punched micro-hole are studied.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 180, Issues 1–3, 1 December 2006, Pages 151–160
Journal: Journal of Materials Processing Technology - Volume 180, Issues 1–3, 1 December 2006, Pages 151–160
نویسندگان
Gwo-Lianq Chern, Yin Chuang,