|کد مقاله||کد نشریه||سال انتشار||مقاله انگلیسی||ترجمه فارسی||نسخه تمام متن|
|793338||902417||2009||10 صفحه PDF||سفارش دهید||دانلود رایگان|
The laser deposition of AISI316 powder blended with Cr3C2 over austenitic stainless steel plate was carried out as part of an investigation aimed at determining the feasibility of applying localized reinforcement to stainless steel components. The chromium carbide powder dissolved in the process to produce a range of carbides which reinforced and increased the hardness of the material. The results of optical microscope metallography and SEM/EDX and XRD analysis as well as microhardness measurements are reported. Surfaces produced by deposition of the powder blend were machine-ground and subjected to pin-on-disc and corrosion tests. The tests indicated an improvement to sliding wear resistance and a good resistance to salt spray and pitting corrosion conditions.
Journal: Journal of Materials Processing Technology - Volume 209, Issue 11, 21 June 2009, Pages 5229–5238