کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
793377 | 902421 | 2009 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: The effect of alternate supply of shielding gases in austenite stainless steel GTA welding The effect of alternate supply of shielding gases in austenite stainless steel GTA welding](/preview/png/793377.png)
Welding system has now been concentrated on the development of new process to achieve cost savings, higher productivity and better quality in manufacturing industry. Discrete alternate supply of shielding gas is a new technology that alternately supplies the different kinds of shielding gases in weld zone. As the new developed methods compared to the previous general welding with a mixing supply of shielding gas, it cannot only increase the welding quality, but also reduce the energy by 20% and the emission rate of fume. As a result, under the same welding conditions, compared with the welding by supplying pure argon, argon + 67% helium mixture by conventional method and the welding by supplying alternately pure argon and pure helium by alternate method showed the increased welding speed. Also, the alternate method showed the same welding speed with argon + 67% helium mixture without largely deteriorating of weld penetration. The alternate method with argon and helium compared with the conventional methods of pure argon and argon + 67% helium mixture produced the lowest degree of welding distortion.
Journal: Journal of Materials Processing Technology - Volume 209, Issue 10, 1 June 2009, Pages 4722–4727